Compressed air is a vital part of many processes. Since compressed air takes a lot of energy to produce, when these systems begin to leak or if they rely on aging compressors, they can be especially costly. Holland BPW offers rebates to help you keep your compressed air system running efficiently.
All rebates for compressed air require pre-approval except for leak repairs and engineered nozzles. Leak repairs and engineered nozzles are available for a rebate of up to 100% of customer cost, or $50,000, whichever is less.
Measures Available
Leak Study and Repair
We recommend performing leak studies and repairs once a year. Our incentives often cover the full costs of the leak study and repairs if you use an approved contractor. Contact us to receive a list of approved partner contactors. No pre-approval required!
Rebates ($20/HP) are available for the repair of a minimum of 50% of leaks by volume documented in a leak study of a compressed air system. Rebates increase to $25/HP if a system audit and report is generated as well. This leak study and/or audit should be performed by a qualified, independent contractor. The leak repairs can be completed by the customer or the contractor. See the rebate application for full terms and conditions.
Additional Rebates
Category | Rebate Amount |
|---|---|
VSD Air Compressor <300 HP | $250/HP |
VSD Air Compressor <50 HP | $150/HP |
Refrigerated Cycling Thermal Mass Air Dryer | $1.25/SCFM |
Variable Speed Air Dryer | $1.75/SCFM |
Engineered Nozzles - No pre-approval required! | $100/Nozzle |
Flow Controller | $1.75/HP |
Dew-point sensor controller for desiccant dryer | $7/SCFM |
Desiccant to Refrigerated Air Dryer | $7/SCFM |
Heat of Compression Air Dryer | $6/SCFM |
Compressed Air Storage Tank | $50/HP |
Air compressor outside air intake | $12/HP |
Low pressure drop air filters for compressed air | $10/HP |
No loss drains–compressed air | $400/drain |
Compressed air applications replaced with electric air blowers | $600/HP |
Apply for a Rebate
How Does the Process Work?
Request Pre-Approval
To ensure that your project is eligible and to reserve funds, please complete, sign and submit all of the following:
- The Pre-approval Agreement (page 3), completed and signed.
- The worksheet(s) (page 6 and/or page 9) that are applicable to your project, completed.
- Itemized quote/proposal with model numbers from your contractor.
Complete Your Project
If your project meets the pre-approval criteria, you will receive a letter indicating funds have been reserved. Following the specifications listed in this application, install your equipment within 90 days. All equipment must be installed and operational by December 31, 2025. To receive your rebate check, a copy of your W9 form must be sent to the email or mailing address below before the project is completed.
Request Payment
Once your project is complete, please request your rebate payment. Within 30 days of project completion, you must submit the following:
- Payment Approval Agreement (page 4 of this application), completed and signed
- Itemized invoice(s) for materials and any applicable external labor costs, including the following:
- Contractor’s name and contact information
- Customer’s name and contact information
- Date of invoice
- Line item cost for each product
- Quantities of each product
- Complete product model numbers
- Labor (and other) expenses listed separately from product costs
- Total invoice amount
Required documents can be emailed to us, or mailed to:
Energy Smart – Holland BPW
625 Hastings Ave
Holland, MI 49423
Don't See Your Improvement Listed?
Reach out to our team of experts about custom compressed air rebates for system improvements that save electricity but are not specifically listed.
